Engine Oil Change; Air Cleaner - Zipper Maschinen ZI-STE1100IV Betriebsanleitung

12.3

Engine oil change


Unscrew the oil filler cap (3); tilt the machine and let the used oil run
into a suitable container.

Add new engine oil (15W40, 260ml) (2) and close the oil cap.

Clean it with a rag.

Put the machine on an even area and start the engine. If there is
sufficient oil level the oil-warning sensor (1) will be not activated.
12.4

Air cleaner


Loosen the screws and remove the air
cleaner cover (1)

Remove the air cleaner (2)

Clean the air filter with soapy water,
then rinse with clear water and let it
dry thoroughly before reassembling.

Reassemble the air cleaner in reverse
order
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-STE1100IV
N O T I C E
Waste oils are toxic and must not be released into the environment!
Contact your local authorities for information on proper disposal.
N O T I C E
Drain the used oil quickly and completely while the engine is still warm.
MAINTENANCE
27