Spark Plug; Fuel Tank And Fuel Filter; Transport; Storage - Zipper Maschinen ZI-STE1100IV Betriebsanleitung

12.5

Spark plug


Remove the spark plug cap (1).

Loosen the spark plug (2) using a
spark plug socket (3).

Remove carbon deposits with a
copper wire brush.

Check electrode gap (0,6 -0,7mm)

Reassemble the spark plug in reverse
order
12.6

Fuel tank and fuel filter


Unscrew the fuel cap (1)

Remove and clean the fuel filter (2)

Check the fuel tank

Replace the fuel filter
12.7

Transport


Secure the machine to prevent slipping

Do not let the fuel spill out of the fuel tank.

When the generator is placed on vehicle, the engine may not run.

During transport, protect the machine from excessive heat. If longer periods in an enclosed vehicle the fuel
may ignite due to overheating.
12.8

Storage

If the machine is stored for longer than 30 days:

Wait until the engine cools down sufficiently.

Allow the fuel from the tank into a suitable
container and store the drained fuel in a suitable
container.

Clean and dry machine

Store in a dry, out of reach of children place

Cover the machine well and store it in a dry and
clean place.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-STE1100IV
MAINTENANCE
28