Beispiel-Konfigurationsprofile; Beispiel Für Xml-Open-Format - Cisco IP Conference Phone 7832 Bereitstellungshandbuch

A
A N H A N G

Beispiel-Konfigurationsprofile

• Beispiel für XML-Open-Format, Seite 75
Beispiel für XML-Open-Format
<?xml version="1.0" encoding="UTF-8"?>
<flat-profile>
<!-- System Configuration -->
<Restricted_Access_Domains ua="na"/>
<Enable_Web_Server ua="na">Yes</Enable_Web_Server>
<Enable_Protocol ua="na">Http</Enable_Protocol>
<Enable_Direct_Action_Url ua="na">Yes</Enable_Direct_Action_Url>
<Session_Max_Timeout ua="na">3600</Session_Max_Timeout>
<Session_Idle_Timeout ua="na">3600</Session_Idle_Timeout>
<Web_Server_Port ua="na">80</Web_Server_Port>
<Enable_Web_Admin_Access ua="na">Yes</Enable_Web_Admin_Access>
<!-- <Admin_Password ua="na"/> -->
<!-- <User_Password ua="rw"/> -->
<Phone-UI-readonly ua="na">No</Phone-UI-readonly>
<Phone-UI-User-Mode ua="na">No</Phone-UI-User-Mode>
<!-- Power Settings -->
<!-- Network Settings -->
<IP_Mode ua="na">IPv4 Only</IP_Mode>
<!-- IPv4 Settings -->
<Connection_Type ua="rw">DHCP</Connection_Type>
<Static_IP ua="rw"/>
<NetMask ua="rw"/>
<Gateway ua="rw"/>
<Primary_DNS ua="rw">64.101.155.135</Primary_DNS>
<Secondary_DNS ua="rw"/>
<!-- IPv6 Settings -->
<!-- 802.1X Authentication -->
<Enable_802.1X_Authentication ua="rw">No</Enable_802.1X_Authentication>
<!-- Optional Network Configuration -->
<Host_Name ua="rw"/>
<Domain ua="rw"/>
<DNS_Server_Order ua="na">Manual,DHCP</DNS_Server_Order>
<DNS_Query_Mode ua="na">Parallel</DNS_Query_Mode>
<DNS_Caching_Enable ua="na">Yes</DNS_Caching_Enable>
<Switch_Port_Config ua="na">AUTO</Switch_Port_Config>
<Syslog_Server ua="na"/>
<Debug_Level ua="na">NOTICE</Debug_Level>
<Primary_NTP_Server ua="rw"/>
<Secondary_NTP_Server ua="rw"/>
<Enable_SSLv3 ua="na">No</Enable_SSLv3>
<!-- VLAN Settings -->
<Enable_VLAN ua="rw">No</Enable_VLAN>
<VLAN_ID ua="rw">1</VLAN_ID>
Cisco IP Conference Phone 7832-Multiplattform-Telefone Bereitstellungshandbuch
75