Concept TM4630 Bedienungsanleitung Seite 29

EN
1. Put the food in the mixing bowl or another tall kitchen vessel.
2. Mount the unit body onto the shaft of the extension stick and twist to secure (Fig. 1).
3. Uncoil the whole length of the power cord. Make sure the cord does not touch any
nearby sources of heat. Insert the plug into the electric voltage socket.
4. Hold the body with one hand and the mixing bowl with the other.
5. Insert the unit into the mixing bowl and push the power switch to initiate operation.
While mixing, use circular movements on the bottom of the bowl. You may increase the
motor rotation speed to the maximum for a short time using the Turbo button.
6. Switch the unit off after mixing. Disconnect the power cord from the socket.
7. To release the stick extension from the body, twist the stick and wash it under running
lukewarm water immediately. Make sure the water does not get inside the extension to
the driving shaft area. If this happens, leave the stick extension to dry, and apply a few
drops of vegetable oil to ease the operation of the stick bearings.
EXAMPLE – MAYONNAISE RECIPE
200-250 ml oil
1 whole egg
1 teaspoon lemon juice or vinegar
salt and pepper
Put all the ingredients in the mixing container in the above-mentioned order. Insert the stick extension to the bottom
of the mixing bowl. Switch ON, and hold the unit in this position until the oil creates an emulsion. Move the operating
unit up and down slowly until you have achieved the desired thickness of the mayonnaise.
CHOPPINg, SHREDDINg, AND CUTTINg
The chopping extension is suitable for chopping meat, cheese, onions, herbs, garlic,
carrots, walnuts, almonds, dried plums, etc.
Do not attempt to chop extremely hard foodstuffs such as nutmeg, coffee beans, and
cereals.
Items like meat, cheese, onions, garlic, carrots, or frozen food must be cut before
chopping.
Remove the stems from herbs and all nutshells.
Remove bones, cartilage and tendons from the meat.
The shredding blade is suitable for processing items like carrots, radish, or other
vegetables. The cutting blade may be used to cut potatoes, gherkins, etc.
1. Mount the plastic shaft [17] onto the metal pin on the bottom of the bowl. Equip the
shaft with the desired tool (CHOPPING – chopping knife [18], SHREDDING – blade
holder with the shredding blade [19, 20], or CUTTING – blade holder with the cutting blade [19, 21]).
2. Fill the mixing bowl with the ingredients (refer to the tables below for the maximum amounts) and close it with
the safety cover [13].
3. Use the lock buttons on the side of the cover [11] to place the bowl cover with transmission [9] safely.
4. Mount the unit body onto the bowl cover with the transmission and secure it by twisting clockwise until
you hear the locks click in place.
5. Uncoil the whole length of the power cord. Make sure the cord does not touch any nearby sources of heat. Insert
the plug into the electric voltage socket.
6. Hold the body with one hand and the chopping bowl with the other.
TM4630
Fig. 1
27