Inhaltsverzeichnis
Werbung
Safety information
Only mount and use the appliance in accordance with the instructions.
The tank must only be connected and commissioned by an expert.
IEC 60364 7 701 (DIN VDE 0100 Part 701) should be observed if the appliance or any electrical
accessories are to be installed in rooms with a bath or shower.
Comply with legal requirements and the connection requirements of the electricity and water
utilities.
Only connect the appliance to a properly installed earthed socket.
Do not use an extension cable.
The electrical lead may only be exchanged and extended by our after sales service.
An all pole isolator with a contact gap of at least 3 mm must be fitted on the installation side.
This tank is only suitable for closed (pressure resistant) operation. The fittings must be approved for
this.
Before installation, block off the water pipe and do not connect the lead.
First connect the water and then the electricity.
It must no longer be possible to touch the live parts after installation.
The safety valve must be actuated regularly to check its function and to remove limescale deposits.
Preparation for installation
Several taps can be supplied by this tank.
The appliance must only be installed in a frost free area.
10
Werbung
Inhaltsverzeichnis
