Safety Information - Siemens BK20100M Handbuch

Safety information

This appliance is intended for
domestic use and the household
environment only.
Risk of electric shock!
Switch off the mains volt-
age supply immediately if a
fault occurs.
We do not accept liabil-
ity for damage resulting
from failure to heed these
instructions.
The water heater may only
be connected and put into
operation by a qualified
professional.
Disconnect the power supply
before opening the appliance.
The statutory regulations of
the respective country, as well
as those of the local electricity
and water suppliers, must be
adhered to.
The water heater may only
be installed in a frost-free
room.
The dismounted appliance
must be stored in a frost-free
area (residual water) and may
not be subjected to frost.
en
Disconnect the electrical
connection cable from the
supply and shut off the wa-
ter supply before connecting
the appliance!
Connect the water supply
and then connect the electri-
cal supply.
The heater should only be
connected to a properly in-
stalled, earthed socket. Do not
use a socket strip.
Do not plug the heater into the
electricity supply until it has
been mounted on the wall.
Do not use an extension cable.
Ensure that the mains cable
does not come into contact
with any of the hot parts of
the appliance. The insulation
could be damaged.
11