Status Monitor - Olivetti Copia 9915D Druckerbedienungsanleitung

STATUS MONITOR

When printing starts, the status monitor screen will appear on the computer display. The status
monitor displays the printer state and information on the current print job.
The status monitor displays the following types of messages, Normal, Warning and Fault. If an
error message appears, check the message description below and perform the listed task.
G
"Copier" in the column "See page:" indicates the description is in the copier
operation manual.
G
You cannot use both the status monitor and the Print Manager at the same
time in Windows 3.1 environment.
Normal Messages
The following messages indicate the current state of the printer. Since these messages indicate
normal operating conditions, you need not take any action.
Message
Ready
Printing in progress
Copying in progress
Warning Messages
Message
TD cartridge is near empty.
Reorder a new cartridge and
replace soon.
Drum cartridge is near end of
life. Reorder a new cartridge and
replace soon.
*1: See the section on SUPPLIES AND USER MAINTENANCE.
Description
The printer is idle and ready for the next print job.
A printing job is in progress.
A copying job is in progress.
Description / Solution
Running out of toner. While printing can
continue, the print quality will be affected.
Reorder a new TD cartridge and replace it.
The drum cartridge is nearly spent. While printing
can continue, the print quality will be affected.
Reorder a new cartridge and replace it soon.
See
page:
1
Copier*
1
Copier*
1-21