Olivetti Copia 9915D Druckerbedienungsanleitung Seite 22

TROUBLESHOOTING
Problem
Paper does
not feed into
the printer.
The printer
prints wrong
data or
incorrect
characters.
Printing is
too slow.
The printer
does not
print the full
image.
*3 See the section on LOADING COPY PAPER.
1-20
Possible cause
Paper is not set correctly.
Too much paper in the paper
tray.
The interface cable might
not be connected properly.
The interface cable
specifications may be
incorrect.
If using Windows 3.1x, Print
Manager may be disabled.
There may be too many
applications open.
The resolution is set to
600dpi.
The computer may have
insufficient random-access
memory (RAM).
The page layout is too
complex.
Resolution is set to 600dpi.
Page orientation setting may
be incorrect.
There may be too many
applications open.
The paper in the printer may
be larger than the paper size
specified in your application
or printer driver.
Interface cable
specifications may be
incorrect.
The CPU specifications may
be incorrect.
The computer may have
insufficient random-access
memory (RAM).
Solution
Insert the paper correctly.
Remove excessive paper from the
paper tray.
Check the interface cable connection.
See the interface specifications.
Double-click the Printers icon in
Control Panel and check the Use
Print Manager box.
Close all unnecessary applications
before printing.
Set the resolution to 300dpi.
Install more random-access memory
(RAM) in your computer.
Simplify the page layout.
Set resolution to 300dpi.
Change the page orientation with the
printer driver.
Close all unnecessary applications
before printing.
Load the correct paper into the
printer.
See the interface specifications.
Check that the CPU of your
computer is 486DX 66MHz or better.
Install more random-access memory
(RAM) in your computer.
See
page:
3
Copier*
3
Copier*
1-4,
1-5
1-25,
1-26
–
–
1-15
1-6
–
1-15
1-15
–
–
1-25,
1-26
1-6
1-6