Olivetti Copia 9915D Druckerbedienungsanleitung Seite 11

Windows 98:
With both the computer and the Copia 9915D turned off, connect the printer to the computer with
either a parallel or a USB interface cable. For connection instructions, see pages 1-4 & 1-5.
Load paper into the paper tray of the printer. For instructions on loading paper, see the
1
section LOADING COPY PAPER found in the copier operation manual.
Turn on the printer.
2
Turn on your computer and start Windows.
3
When using the USB interface:
• Connect your personal computer and the printer using a USB interface cable if you
have not already done so. (For information about connecting the USB interface
cable, see page 1-5.)
• When the "Add New Hardware Wizard" window appears, insert the installation CD-
ROM, click the Next button, follow the on-screen instructions, and finally click the
Finish button.
Before installing the printer driver, be sure to close all other applications which
may be open.
When using Windows 98 on a personal computer with plug & play*, the "Add New Hardware
4
Wizard" window will appear. Click the Next button and follow the on-screen instructions.
G
If the "Add New Hardware Wizard" window does not appear, proceed to step 8.
*Plug &play: For plug & play information, see page 1-7.
Select Search for the best driver for your device and click the Next button.
5
INSTALLING THE PRINTER DRIVER SOFTWARE
1-9