Test Printing - Olivetti Copia 9915D Druckerbedienungsanleitung

TEST PRINTING

To test print the configuration page and font list, use the following procedure:
Press and hold down the light (
1
5 seconds until all the alarm indicators (
the display.
Set "6" (configuration page) or "7" (font list) using the left copy quantity (
2
selected number will blink in the left side of the display.
Press the print (
3
currently selected parameter number for the program will blink on the right side of the
display.
Select the desired parameter using the right copy quantity (
4
paramemer number will blink on the right of the display.
Program
No.
6
7
Press the print (
5
To change the setting or to set another mode, press the clear (
printer will return to step 2.
1-18
) and dark (
) key. The entered program number will be steadily lit and the
Mode
Configuration page 0
3
0
Font list
3
) key. The test page prints.
) keys simultaneously for more than
, , and ) blink and "--" appears in
Parameters
English 1 French
Italian 4 German
English 1 French
Italian 4 German
) key. The
) key. The entered
2 Spanish
2 Spanish
) key. The