Werbung
Wiring the DC-Input Power Source
Step 5
Use a ratcheting torque screwdriver to torque the terminal block captive screw
(above the installed wire lead) to 4.5 1bf-in. (72 ozf-in.).
Do not overtorque the terminal-block captive screws. The
Caution
recommended maximum torque is 4.5 lbf-in. (72 ozf-in.).
Torque to 4.5 lbf-in.
Using the Catalyst 2924M XL DC Ethernet Switch
18
78-10499-01
Werbung
