Werbung
Step 4
Insert the exposed wire of one of the four DC-input power source wires into the
terminal block plug. Make sure that you cannot see any wire lead. Only wire with
insulation should extend from the terminal block plug.
Warning
An exposed wire lead from a DC-input power source can conduct
harmful levels of electricity. Be sure that no exposed portion of the
DC-input power source wire extends from the terminal block plug.
78-10499-01
Wiring the DC-Input Power Source
Return
Negative
Return
Negative
Using the Catalyst 2924M XL DC Ethernet Switch
Feed A
Feed B
17
Werbung
