Troubleshooting - Electrolux GT380 Benutzerinformation

5. Place a tray beneath the outer drain
plug.
6. Pull out the outer drain plug.
7. Rotate the drain plug 180 degrees to
let the drain water flow into the tray.

10. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
10.1 What to do if...
There are sounds which may occur during the operation of the appliance
(e.g. bubbling, whirring, cracking or clicking), which are normal.
Problem
The appliance does not op‐
erate.
8. Clean the interior and dry it
9. Switch on the appliance.
10. Set the temperature to MAX setting
11. Set the temperature to the desired
Possible cause
The appliance is switched
off.
Make sure the water does
not spill out of the tray.
thoroughly.
and close the lid. Wait two or three
hours before you reload previously
removed food into the appliance.
setting.
Solution
Switch on the appliance.
ENGLISH 61