Specifications - Makita DHR164 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Switch trigger
4-1. Switch trigger
4-2. Lamp
5-1. Reversing switch lever
6-1. Lock button
6-2. Rotation with hammering
6-3. Action mode changing knob
7-1. Rotation only

SPECIFICATIONS

Capacities
Blows per minute
Battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Noise
The typical A-weighted
according to EN60745:
Model DHR164
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model DHR165
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Explanation of general view
8-1. Grip base
8-2. Side grip
8-3. Loosen
8-4. Tighten
8-5. Teeth
8-6. Protrusion
9-1. Bit shank
9-2. Bit grease
10-1. Bit
10-2. Chuck cover
11-1. Bit
11-2. Chuck cover
Model
Concrete
Steel
Wood
No load speed
Overall length
Rated voltage
Net weight
noise level determined
) : 85 dB (A)
pA
) : 96 dB (A)
WA
) : 88 dB (A)
pA
) : 99 dB (A)
WA
DHR164
D.C. 14.4 V
BL1415N
2.2 kg
ENE042-1
Vibration
The vibration
determined according to EN60745:
Model DHR164
ENG905-1
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 2.0 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DHR165
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
5
12-1. Depth gauge
13-1. Dust cup
15-1. Blow-out bulb
16-1. Chuck adapter
16-2. Keyless drill chuck
17-1. Sleeve
17-2. Ring
18-1. Limit mark
19-1. Holder cap cover
19-2. Recessed part
20-1. Brush holder cap
20-2. Screwdriver
DHR165
16 mm
13 mm
24 mm
-1
0 - 1,600 min
0 - 5,300
297 mm
D.C. 18 V
BL1430, BL1815N,
BL1440 BL1820
2.4 kg 2.2 kg
total value (tri-axial
) : 12.5 m/s
h,HD
2
) : 3.5 m/s
h,D
2
) : 12.0 m/s
h,HD
2
) : 3.0 m/s
h,D
2
BL1830, BL1840,
BL1850
2.5 kg
ENG900-1
vector sum)
2
2
2
2