Specifications - Makita HR2300 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Switch trigger
1-2. Lock button
2-1. Lamp
3-1. Reversing switch lever
4-1. Quick change chuck for SDS-plus
4-2. Change cover line
4-3. Change cover
5-1. Spindle
5-2. Quick change drill chuck
5-3. Change cover line
5-4. Change cover
6-1. Rotation with hammering
6-2. Rotation only
6-3. Action mode changing knob
7-1. Rotation with hammering
7-2. Action mode changing knob
8-1. Rotation only
9-1. Hammering only
10-1. Protrusions
10-2. Grooves
11-1. Bit shank
11-2. Bit grease

SPECIFICATIONS

Model
Concrete
Capacities
Diamond core bit (dry type)
No load speed (min
Blows per minute
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood, metal,
ceramic and plastic.
Explanation of general view
12-1. Bit
13-1. Bit
13-2. Chuck cover
14-1. Action mode changing knob
16-1. Grip base
16-2. Lock button
16-3. Depth gauge
17-1. Toothed side of hex hole marking
17-2. Toothed side of the depth gauge
18-1. Lock button
19-1. Toothed side of hex hole marking
19-2. Toothed side of the depth gauge
20-1. Dust cup
21-1.
21-2. Grooves
21-3. Dust cup
22-1. Bit
22-2. Chuck cover
23-1. Attachment at the foot of dust cup
24-1. Bellows
HR2300
Core bit
Steel
Wood
-1
)
356 mm
2.7 kg
on the grip base
on the grip base
symbol
HR2310T HR2600
23 mm
68 mm 68 mm
70 mm 80 mm
13 mm 13 mm
32 mm 32 mm
380 mm
2.9 kg 2.8 kg
ENE042-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
5
24-2. Attachment
25-1. Inside periphery
25-2. Carved side
25-3. Attachment
25-4. Cap
25-5. Groove
26-1. Cap
26-2. Attachment
29-1. Blow-out bulb
31-1. Chuck adapter
31-2. Keyless drill chuck
32-1. Quick change chuck for SDS-plus
32-2. Change cover line
32-3. Change cover
33-1. Spindle
33-2. Quick change drill chuck
33-3. Change cover line
33-4. Change cover
34-1. Sleeve
34-2. Ring
34-3. Quick change drill chuck
35-1. Dust cap
HR2601 HR2610 HR2610T
26 mm
0 - 1,200
0 - 4,600
361 mm 385 mm
2.9 kg 2.8 kg 2.9 kg
/II
HR2611F HR2611FT
68 mm
80 mm
13 mm
32 mm
361 mm 385 mm
2.9 kg 3.0 kg
ENF002-2