Maintenance Intervals - VESTEL VEA 36016 Bedienungsanleitung

• Take out the activated carbon filter in
the direction of the arrow towards the
front. (is held with magnets).
• Unscrew the connecting screw.
WARNING : Place the case on a firm
surface, then push the filter down
slightly to remove it.
• Remove the activated carbon filter from
the filter frame as shown on.
• Allow the activated carbon filter to
regenerate for one hour inside the
baking oven at about 200°C. After
cooling down, reinsert the filter into the
hood.
• This procedure may be repeated not
more than 10 times, after that filter must
be replaced by a new one.
• Re-insert the activated carbon filter by
performing the previous steps in reverse
order.

5.4 MaintenanCe interValS

The device performance will be
negatively impacted by any non-
compliance with the maintenance
intervals!
In case of overlong use, the metal grease
filter as well as the activated charcoal filter
will be clogged with fat and dirt particles,
which will negatively impact the device
performance.
• Please observe all maintenance
intervals specified in this manual.
Interval
After assembling
and in case of heavy
contamination
After cleaning the
extractor hood
Every other week or
when the grease filter
prompt appears
Every 3 month or in case
of decreasing perfor-
mance
EN - 27
Maintenance task
Outside cleaning of the
device.
Servicing the device.
Cleaning the metal
grease filter.
Cleaning or replacing the
activated carbon filter (for
circula-tion fan operation
only).