Important Safety Instructions - Honeywell HTF1220BE Betriebsanleitung

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Read through all the instructions before
starting to use the appliance. Keep this
manual in a safe place for future reference.
These instructions are also available on our
website. Please visit www.hot-europe.com.
• This appliance must only be operated
as instructed in this user manual.
• This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
• Do not touch the rotating fan blades
with any part of the body. This can
cause personal injury and damage.
• Clean the appliance regularly by
following the "Cleaning" section.
• This appliance is only designed for
indoor use.
• Always switch the appliance off when
not in use, during cleaning or transport.
• If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
• Do not use this appliance if it is
damaged or shows any signs of possible
damage, or if it is not functioning
properly. Disconnect the power plug
from the power socket.
COMPONENTS
(See page 3)
1. Front Grille
2. Blade
3. Plastic Nut
4. Rear Grille
5. Motor Shaft
6. Oscillation Knob
7. Fan Body
8. Blade Nut
9. Speed Control Buttons
10. Base
11. Grille Locking Ring
12. Fan Head Assembly
13. Prongs
ASSEMBLY INSTRUCTIONS
(See page 3)
Base Assembly
1. Insert the Fan Body assembly into the base until it
clicks into place (Fig. 1).
Assembly of Blade and Grilles
1. Unscrew the blade nut clockwise and the plastic nut
counterclockwise and set aside (Fig. 2).
2. After removing the blade's disposable shipping
retainer clip on the rear grille, position the grille
onto the fan head assembly making sure the three
alignment holes are aligned with the three prongs.
3. Screw on plastic nut tightly clockwise to attach rear
grille (Fig. 3).
4. Install the blade onto the shaft until the motor shaft
pin is seated in the blade.
5. Screw blade nut to the motor shaft counterclockwise
(tighten by turning to the left) (Fig. 4).
6. Place grille locking ring around rear grille and then
press front grille into locking ring. Tighten tension
screw with screw driver (Fig. 5).
4
OPERATING INSTRUCTIONS
• Place your fan on a level and dry surface.
• Plug the power cord into a polarized 220 Volt AC wall
outlet. Please make sure the speed control is in the
off position.
Speed Control
Speed is controlled by pressing the Control Pad button to
the desired setting:
= Off; = Low; = Medium; = High
Oscillation Control
To make the fan oscillate, push down on the oscillation
knob located on the top of the motor housing. To stop the
fan from oscillating, pull up on the oscillation knob when
the fan is in the desired position.
Tilt Control
The airflow can be adjusted upward or downward by
tilting the fan head as desired. To change the tilting angle
of the fan head assembly, simply move the fan head to
the desired angle.
CLEANING, STORAGE AND DISPOSAL
Cleaning
• Switch the appliance off and remove the power plug
from the socket.
• Clean the outer surfaces of the appliance with a soft,
damp cloth. Do not use petroleum, thinners or any
other chemicals. Use your vacuum cleaner with the
brush attachment to clean the grids.
• Do not plunge the appliance into water or any other
liquids and do not pour water or any other liquids over
the appliance.
Storage
• If you do not wish to use the appliance for a longer
period, clean it as described above.
• Store the appliance in a cool, dry location. Cover it up
to protect it from dust.
ENGLISH
DISPOSAL
This appliance complies with EU legislation
2012/19/EU on end of life recycling. Products
showing the 'Crossed Through' wheeled bin
symbol on either the rating label, gift box or
instructions must be recycled separately from
household waste at the end of their useful life.
Please DO NOT dispose of appliance in normal
household waste. Your local appliance retailer may
operate a 'take-back' scheme when you are ready to
purchase a replacement product, alternatively contact
your local government authority for further help and
advice on where to take your appliance for recycling.
GUARANTEE
Please read all instructions before attempting to use this
device. Please retain the receipt as proof of and date of
purchase. The receipt must be presented when making
any claim within the relevant guarantee period. Any claim
under the guarantee will not be valid without a proof of
purchase.
Your device is guaranteed for three Years (3 Years) from
date of purchase.
This guarantee covers defects in materials or
workmanship that occur under normal use; defective
devices meeting these criteria will be replaced free of
charge.
The guarantee DOES NOT cover defects or damage
resulting from abuse or failure to follow the user
instructions. The guarantee becomes void if the device
is opened, tampered with or used with other parts or
accessories, or if repairs are undertaken by unauthorised
persons.
Accessories and consumables are excluded from any
warranty.
For support requests, please visit
www.hot-europe.com/support or find service contact
information at the end of this owner's manual.
This Guarantee is applicable to Europe, Russia, Middle
East and Africa only.
UK Only: This does not affect your consumer statutory
rights.
5