Operations - Nilox FOOLISH DUCATI Bedienungsanleitung

format the card inserted, but not format the memory of the machine.
h.
settings to factory default. After restoring, the system will set the display mode of submenu of the "Menu" in English
state. Press "M" key to enter the menu selection, press "<" or ">" key to enter the menu "Setup", press "-" key to
select the option "Language", and then it can set in Chinese state. The system will set the time at 2011.01.01 after
restoring factory default.
i.
Chinese" can be selected via left or right key.
j. Light source frequency: Select the light source frequency 50Hz or 60Hz, depending on local grid frequency, in order
to avoid the screen flickering in preview mode or in video recording.
k.
displayed on the bottom right corner of the video file or photo file when recording or shooting;
Note: To press "M" key under the submenu may exit from it.

Operations:

1. Insert the Micro SD card.
2. Turn the power switch to "ON" to turn on FOOLISH DUCATI, and the red indicator will be lightened and FOOLISH
DUCATI will enter preview mode.
Note:
a. In case of low battery power, you will find the battery icon "
b. lf no Micro SD card is inserted, you will find the Micro SD card icon "
3. Video recording:
(1) Manual recording:
Press "Record" key once in preview state, the system will start recording, the video recording duration will be displayed
on the bottom right of TFT display screen, the " Green Indicator of Video/Voice Recording" and the frontal "Video
Recording/Shooting Indicator (Red)" will twinkle slowly, and the recording duration on LCD segment screen is displayed
normally. The video recording process only responds to operations of zoom In ("+" key)/zoom out ("-" key) function; if
press "Record" key again, the system will stop and save the current video recording file, the frontal green indicator of
video recording will be off, FOOLISH DUCATI will return to the preview state, and the recording duration on LCD
segment screen will be stopped displaying.
Note:
a. Turn the power switch to "OFF" in video recording, the system will save the current file recorded and then shut
down;
b. lf the battery power is low in video recording, the system will save the current file recorded and give the message
"Low Battery" on TFT display screen until FOOLISH DUCATI is turned off or auto enters standby mode;
c. lf the memory space gets full in video recording, the system will save the current file recorded, give the message
"Insufficient Memory" on TFT display screen, and go back to the preview mode. The video recording duration on LCD
segment screen also will be stopped displaying.
Factory default: The operation restores the parameter
Language: "English", "Simplified Chinese" or "Traditional
Date/Time: Time can be adjusted and changed. It will be
"and the message "Low Power" on the TFT screen.
"on the TFT screen.
~ 12 ~