Inserting/Exchanging Gobos - EuroLite LED TMH-S30 Bedienungsanleitung

Inserting/Exchanging gobos

If you wish to use other forms and patterns as the standard-gobos, or if gobos are to be exchanged, please
follow the instructions below:
1. Open the Moving Head projector head via the four screws (see Graphic 1).
2. Carefully remove the gobo wheel (see Graphic 2).
Graphic 1
Remove the fixation-ring with an appropriate tool. Remove the gobo and insert the new gobo. Press the
fixation-ring together and insert it in front of the gobo.
Install the gobos with the device switched off only.
Unplug from mains before!
Never unscrew the screws of the rotating gobo
as the ball bearing will otherwise be opened!
Slot-in gobo-system for exchanging gobos without tools!
Inserting/Exchanging gobos as described above.
DANGER!
Graphic 2
CAUTION!
Note!
21/28 127079.docx, Version 1.0