LED TMH-S30 Moving Head Spot
DANGER! Electric shock caused by short-circuit
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires. Never open the housing. Keep the device away from rain and
moisture.
Please read these instructions carefully before using the product. They contain important
information for the correct use of the product.
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet
INTRODUCTION
Thank you for having chosen one of our products. If you follow the instructions given in this manual, we are
sure that you will enjoy this device for a long period of time.
Product features
Distinctive Moving Head Spot with 30 W LED, gobos and color wheel
One highpower 30 W COB LED in cold white
•
Positioning within 540° PAN and 180° TILT
•
Exact positioning via 16 bit PAN/TILT movement resolution
•
Auto, music, master/slave and DMX mode
•
Built-in auto and music show programs
•
10 or 12 DMX channels selectable
•
7 brilliant, dichroic colors plus white
•
Rainbow effect with adjustable speed
•
Rotating gobo wheel with 7 rotating gobos plus open
•
With gobo-shake function
•
Slot-in gobo system for exchanging gobos without tools
•
Strobe effect with adjustable speed
•
Electronic dimmer
•
Manual focus
•
Supports QuickDMX - the wireless DMX-system from Eurolite
•
Built-in phantom-powered USB port for QuickDMX receivers (accessories)
•
Sound-control via built-in microphone; sensitivity adjustable
•
Fan-cooled
•
Control board with 4-digit LED display for adjusting the DMX-starting address, PAN/TILT Reverse,
•
Program, Reset
Switch-mode power supply for operation between 100 and 240 volts
•
Additional rubber feet when the spot shall be positioned on the floor
•
USER MANUAL
16/28
127079.docx, Version 1.0