Inserting The Batteries; Basic Operation; Setting The Telescopic Tube; Switching On The Appliance - Bosch BGB6 serie Gebrauchsanleitung

Insert the hose adapter into the air-
2.
intake opening in the lid and lock it
in place.
→ Fig.
4
Connect the handle to the tele-
3.
scopic tube.
→ Fig.
5
Connect the telescopic tube to the
4.
floor nozzle.
→ Fig.
5
Place the accessory support
5.
the telescopic tube.
→ Fig.
6
Place the crevice nozzle
6.
bottom onto the accessory support
1
.
→ Fig.
6
Place the brush ring
7.
holstery nozzle
→ Fig.
7
Place the upholstery nozzle
8.
the brush ring
the accessory holder
→ Fig.
6

Inserting the batteries

Insert the batteries into the Re-
▶
mote-Power-Control handle.
→ "Changing the batteries",
Page 39

Basic operation

Basic operation
You can find out everything you need
to know about operating your appli-
ance here.

Setting the telescopic tube

Unlock the telescopic tube.
1.
Set the required length of the tele-
2.
scopic tube.
→ Fig.
8
1
Depending on the appliance specifications
1
1
from the
1
onto the up-
1
.
1
with
1
from above onto
1
.

Switching on the appliance

Hold the mains plug and pull it out
1.
to the required length.
Insert the mains plug into the
2.
socket.
Press
3.
→ Fig.
a The status display pulses white.
a The appliance is in standby mode.
onto
Note: Risk of damage to the appli-
ance caused by being in standby
mode for too long. If you want to stop
vacuuming for a longer period of
time, switch off the appliance.

Switching off the appliance

Press
1.
a The status display goes out and
quickly flashes white three times
after a short time.
a The appliance switches off. Any
functions currently in progress are
cancelled.
Unplug the mains plug.
2.
Briefly pull on the mains power
3.
supply cord and then let go.
a The power cord retracts automatic-
ally.

Starting vacuuming

Requirement: The appliance is in
standby mode.
→ "Switching on the appliance",
Page 35
Press
▶
→ Fig.
a The status display lights up white.
a The appliance starts at the highest
power level.
a The appliance starts in the most
recently selected power level if va-
cuuming was stopped previously.
Basic operation en
⁠ .
9
.
⁠ .
10
35