Guidance And Manufacturer's Declaration; Emc Compliance - Welch Allyn 719-Serie Gebrauchsanweisung

8 A - English
Specifications and design may change without notice.
Item
Handle model number
Dimensions
Ingress protection
Weight
Typical charge time
Typical discharge time
Conforms with
Charger accessory material number
Charger input
Charger output

Guidance and manufacturer's declaration

EMC compliance

Special precautions concerning electromagnetic compatibility (EMC) must be taken for all
medical electrical equipment. This device complies with IEC 60601-1-2:2014/EN
60601-2-1:2015.
• All medical electrical equipment must be installed and put into service in accordance
with the EMC information provided in this Directions for use.
• Portable and mobile RF communications equipment can affect the behavior of
medical electrical equipment.
The device complies with all applicable and required standards for electromagnetic
interference.
• It does not normally affect nearby equipment and devices.
• It is not normally affected by nearby equipment and devices.
• It is not safe to operate the device in the presence of high-frequency surgical
equipment.
• However, it is good practice to avoid using the device in extremely close proximity to
other equipment.
Welch Allyn 719 Series Lithium Ion Handle and USB Charging Accessory
Specification
719XX handle
5.4" L x 1.125" Dia. (Max.) (137mm x 28.6 mm)
IPXO
Continuous operation
Internally powered
4.5 oz. (128 g)
18 hours (fully discharged)
110 minutes (for new battery)
IEC/UL/CSA/EN 60601-1 when used with 719XX Handle &
71955 USB Charging Accessory
71955
5VDC, 0.5A
5VDC, 120mA