Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Directions for use
No.
5
6
7
8
9
Device information
Charge the device
1. Remove instrument head and insert the T-stud on the USB charging module into the
T-slot on the battery section.
2. Rotate 90° in either direction.
The T-stud will lock into place.
3. Using the Welch Allyn-supplied USB cable, connect the Micro-B end of the cable to
the charging module.
4. Connect the USB-A end of the cable to the charging source.
5. Charge for 18 continuous hours to charge a fully discharged battery.
The charging indicator on the USB charger will blink during charging and then stay on
when the battery section is fully charged.
The battery may be charged after partial discharge without negatively affecting
overall battery memory (unlike Ni-Cad cells).
Feature
Chrome ring
Battery section (71960)
USB charging module
USB Micro-B port
Charging indicator light
CAUTION Use only with USB compliant power and/or data
ports.
A - English 5
Werbung
Inhaltsverzeichnis
