DeWalt DPN1564A-XJ Originalanweisungen Seite 8

ENGLI S H
PNEUMATIC NAILERS & STAPLERS - DPN1564A-XJ, DPN1664-XJ,
DPN1850-XJ, DPSB2IN1-XJ, DPSSX38-XJ, DPSSL540-XJ
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the
most reliable partners for professional power tool users.
m Warning!
• IMPORTANT SAFETY INFORMATION ENCLOSED.
• READ THIS MANUAL BEFORE OPERATING THE TOOL.
• SAVE FOR FUTURE REFERENCE.
• FAILURE TO OBSERVE THE FOLLOWING
WARNINGS COULD RESULT IN INJURY.
• Do not use damaged, frayed or
deteriorated air hoses and fittings.
• Air powered tools can vibrate in
use. Vibration, repetitive motions or
uncomfortable positions may be harmful
to your hands and arms. Stop using any
machine if discomfort, tingling feeling
or pain occurs. Seek medical advice
before resuming use.
• Do not carry the tool by the hose.
• Keep body stance balanced and firm.
Do not overreach when operating this tool.
• Always turn off the air supply and
disconnect the air supply hose before
installing, removing or adjusting any
accessory on this tool, or before
performing any maintenance on this tool.
• Use protective equipment such as
glasses, gloves, safety shoes as well
as acoustic protection. Remain vigilant,
use common sense and pay attention
when using the machine.
8
• Always wear suitable CE marked
eye protection when operating or
performing maintenance on this tool.
• Operate at no more than the tool's
maximum pressure stated in column
"I" of the technical data table.
• Do not over-oil and do not use heavy
grade oil as stalling and low
performance may result.
m This tool is intended to be used for fastening wood
to wood in applications such as the finishing around
doors,windows and edging; draw bottoms, cabinet
backs and cabinet making; picture framing and
furniture trim. DO NOT USE for fastening harder
materials which could cause buckling of the
fasteners and damage to the tool. If you are unsure
of the suitability of this tool for certain applications,
please contact your local sales office.
m IMPORTANT! Tool Operation:
• To identify the operation type of your model, check
the ID label affixed to the tool/ rear of this manual
and the corresponding table row L for that model.
Read the corresponding section in the Safety &
Operating instructions for information of each trip
type.
Note: Use only fasteners recommended by DEWALT for use
in DEWALT tools or nails which meet DEWALT specifications.