Herunterladen Diese Seite drucken

Sanus Systems VMPR1 Montageanleitung Seite 8

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 19
Step 4A: Attach VMPR1 Top Assembly to Ceiling and install Top Cover - Flat Ceilings
Using the Lag Bolts (U) and Lag Bolt Washers (T) secure the VMPR1 Top Assembly to the framing member at the location
selected in Step 1: Ceiling Preparation.
CAUTION: Do not over tighten the lag Bolts (U). Tighten lag Bolts until they are pulled firmly against the ceiling
Plate (C). If there is a layer of drywall or other material, this drywall or other material may not exceed 5/8 inch (15.8
mm) in thickness. Failure to heed this caution may result in property damage and/or personal injury.
Tighten the Lag Bolts (U) until the Ceiling Plate (C) is flush with the ceiling drywall.
Choose the desired color Top Cover (H) and simply slide it over the Adjustment Bracket (D) until it fits snugly onto the Ceiling
Plate (C).
Step 4B: Attach VMPR1 Top Assembly to Ceiling and install Top Cover - Vaulted or Cathedral Ceilings
Using the Lag Bolts (U) and Lag Bolt Washers (T) secure the VMPR1 Top Assembly to the framing member at the location
selected in Step 1: Ceiling Preparation.
CAUTION: Do not over tighten the lag Bolts (U). Tighten lag Bolts until they are pulled firmly against the ceiling
Plate (C). If there is a layer of drywall or other material, this drywall or other material may not exceed 5/8 inch (15.8
mm) in thickness. Failure to heed this caution may result in property damage and/or personal injury.
Tighten the Lag Bolts (U) until the Ceiling Plate (C) is flush with the ceiling drywall.
Loosen the Pitch Adjustment Screws on the NPT Adapter (E) and set the NPT Extension Pipe (F) so that it is facing down;
then, retighten the Pitch Adjustment Screws.
Rotate the Adjustment Bracket (D) until the Set Screw (N) is facing the screen; then, tighten the Set Screw securing the
Adjustment Bracket to the NPT Extension Pipe (F).
Choose the desired color Top Cover (H) and simply slide it over the Adjustment Bracket (D) until it fits snugly onto the Ceiling
Plate (C).
Diagram 4A
T
U
H
Diagram 4B
T
U
N
C
T
U
D
C
E
F
D
H

Werbung

loading