Installation Instructions; Technical Information; Product Specifi Cations; Electrical Connection - Atag MC 4111E Anleitung

9 Installation instructions

9.1 Technical information

On the label on the inside of this equipment, you will fi nd the total wattage, the required
voltage and the frequency.
9.2 Product specifi cations
External dimensions (wxdxh)
Building in dimensions
Oven capacity
Turntable diameter
Rated voltage
Rated input power
Rated output power
* Depth excluding the 20 mm depth of the dashboard.

9.3 Electrical connection

This appliance requires a mains power supply of 230 V, 50 Hz alternating current.
The device has a grounded power cord.
Caution! The appliance must be grounded and under no circumstances should it be
connected to a direct current supply. Incorrect use could cause an electric shock.

9.4 Important information about installing

• This appliance is NOT intended for use in a commercial environment.
• Please observe the installation instructions provided and note that this appliance
should only be installed by a qualifi ed technician.
• The appliance is fi tted with a plug and must only be connected to a properly
installed earthed socket. The fuse protection must be rated at 16 amps (L or B-type
miniature circuit breakers).
• In case a new socket is needed, installation and cable connection must only be done
by a qualifi ed electrician. If the plug is no longer accessible following installation, a
pole disconnecting device must be present on the installation site with a contact gap
of at least 3 mm.
• Adapters, multiway strips and extension cords must not be used. Overloading can
result in fi re.
595 mm x 550 mm* x 460 mm
560 mm x 550 mm x 450 mm
44 liter
360 mm
230 V / 50 Hz
3350 W
900 W
111