Atag MC 4111E Anleitung Seite 103

5 Operation
1. Press the on/off button to activate the microwave
function.
'01:00' is blinking in the display and the microwave icon
appears in the display.
2. Turn the function knob three positions (P01) or four
positions (d01) to the right.
Time, weight, the fi rst number of the automatic programs
and the defrost icon/automatic cooking program icon are
shown in the display.
3. Turn the selection knob to the right to choose an
automatic cooking program (see the table on page 102).
If the symbols stops blinking, the chosen program has
been activated. You can go back one step by turning the
function knob one position to the left.
4. Press the power/weight button to set the weight.
The weight is blinking in the display.
5. With the selection knob you set the right weight. Press the
power/weight button again to confi rm the setting.
The weight that can be set depends on the program that
you have chosen.
6. Press the start/pause button to start the automatic cooking program.
The programmes with a * are preheated (see page 102). During preheating, the
cooking time pauses and the preheating symbol
wil hear an alarm and te preheating symbol
baking tray and insert it in the oven on level 1 (P03) or put the dish on the turntable
with the round wire rack (P05/P06/P07). Press start.
When the cooking program is ready, you will hear 5 beeps. The fan continues to
operate for some time and then stops automatically.
If you do not press the start/pause button, the combi microwave oven switches itself off
automatically after 15 minutes.
is on. After preheating, you
will blink. Put the dish on the glass
103