Combi Microwave Functions - Atag MC 4111E Anleitung

5 Operation

5.4 Combi microwave functions

1. Press the on/off button to activate the microwave
function.
'01:00' is blinking in the display and the microwave icon
appears in the display.
2. Turn the function knob two positions to the right.
The hot air icon is blinking. Time, temperature, the
microwave icon and the oven icon are shown in the
display.
3. Turn the selection knob to the right to choose a mode
(see the table on page 98). If the symbols stops blinking,
the chosen mode has been activated. You can go back
one step by turning the function knob one position to the
left.
4. You can adjust the power, the time and/or the
temperature in every mode (grill; setting 1, 2 or 3,
3 is the highest setting). Press the power/weight button,
the clock button or the temperature/automenu button.
The power, time or temperature (grill setting 1, 2 or 3)
is blinking. By turning the selection knob you can set the desired powerlevel, time
and/or temperature (grill setting). To confi rm the setting, press the power/weight
button, the clock button or the temperature/automenu button again.
The power, time and temperature that can be set depends on the mode that you
have chosen.
5. Press the start/pause button to start the cooking process.
When the cooking process is ready, you will hear 5 beeps. The fan continues to
operate for some time and then stops automatically.
If you do not press the start/pause button, the combi microwave oven switches itself off
automatically after 15 minutes.
101