SOMFY TaHoma Installationsanleitung Seite 47

- Click the or arrows to control the RTS end product.
If the RTS end product does not react to the orders
given, check that it is working correctly with the remote
control, and then click "Cancel" to repeat the procedure.
- Click "Continue" to move on to the next step.
- Enter the name of the RTS end product, then select an
icon by clicking it.
- Click "Continue" to move on to the next step.
- Click "Add" and repeat the procedure to add another RTS
end product.
- Once you have added all of the RTS end products, click
"Continue" and then go to the "Configuring the house"
section.
You can also rename or delete an RTS end product by
clicking the corresponding button.
- Renaming an end product:
- Enter the new name, then click "Apply".
- Deleting an end product:
- First, TaHoma® will ask you to test the connection.
- Then, press the PROG button on the individual remote
control that controls the end product to be deleted until
the end product moves back and forth (≈ 2 seconds).
- Then click on "Delete" in the TaHoma® interface to
remove the end product from the installation.
Copyright © 2010-2011 Somfy SAS. All rights reserved.
TaHoma®
9