English Gb - Honeywell COMFORTTEMP HCE646BE Betriebsanleitung

ENGLISH GB

IMPORTANT SAFETY INSTRUCTIONS
Read through all the instructions before
starting to use the appliance. Keep this
manual in a safe place for future reference.
These instructions are also available on our
website. Please visit www.hot-europe.com.
• This appliance must only be operated
as instructed in this user manual.
• This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
• Children of less than 3 years should
be kept away unless continuously
supervised. Children aged from
3 years and less than 8 years shall only
switch on/off the appliance provided
that it has been placed or installed in
its intended normal operating position
and they have been given supervision
or instruction concerning use of the
appliance in a safe way and understand
the hazards involved. Children aged
from 3 years and less than 8 years
shall not plug in, regulate and clean the
appliance or perform user maintenance.
• CAUTION — Some parts of this product
can become very hot and cause burns.
Particular attention has to be given
where children and vulnerable people
are present.
• The heater must not be located
immediately below a socket outlet.
• Do not use this heater in the immediate
surroundings of a bath, a shower or a
swimming pool.
• DO NOT COVER WARNING: In
order to avoid overheating, do not
cover the heater with anything, as
indicated by the symbol. This can lead
to overheating, fire or electric shocks.
Ensure that the air intake and outlet
vents are not obstructed.
• The appliance is intended only for
use indoors, not for outdoor use or
commercial use.
• Do not use the appliance anywhere near
easily flammable gases or substances
such as solvents, lacquers, glues, etc.
Some of the internal parts can be hot
and could throw sparks.
• Keep flammable materials at least
1 meter away from the heater. To
prevent burns, do not allow bare skin to
come in contact with hot surfaces.
• If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
• Never touch the unit with wet hands.
• Check for any obstructions. If you
find an obstruction, turn off the
heater using the power button on
the control panel. Allow the heater
to cool completely, then remove the
obstruction. Wait at least 10 minutes,
then turn on the heater and follow the
instructions for use.
4
COMPONENTS
(See pages 2-3)
1. Control panel
A. Power button
B. Temperature setting
C. Heat levels indicator
D. Oscillation
E. Heat Setting
F. Motion sensor
G. Timer button
H. Continuous heating mode
2. Air grille
3. Cool touch housing
4. 360° tip over protection
5. Sturdy base
6. Remote control (at the back of the product)
I. Power button
J. Oscillation
K. Heat setting
L. Temperature setting
M. Motion sensor
N. Timer button
7. Mechanical switch on/off button
8. Placement of motion sensor
ABOUT CERAMIC TECHNOLOGY
Ceramic heaters generate heat by passing electricity through heating wires
embedded in ceramic plates.
In the Honeywell ComfortTemp™ Ceramic Heater, air is drawn into the back
of the heater by a fan, and then pushed through the ceramic element and out
the front of the heater to gently introduce warm air into the room.
This type of heating technology provides consistent, even heating.
For best heat output, place heater on the floor and allow it to run for
5-10 minutes.
SET UP
The Honeywell ComfortTemp™ Ceramic Heater requires no assembly. Simply
unpack heater and save all packaging materials for off-season storage.
Place the heater on a firm, level, open surface free from obstructions and at
least 1 meter away from any wall or combustible material.
DO NOT use on an unstable surface such as bedding or deep carpeting.
BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY BE
TRIPPED OVER BY CHILDREN OR PETS.
MOVING THE HEATER
This heater is equipped with a Cool Touch handle for your convenience.
Turn off the heater.
Allow it to cool for ten minutes.
Unplug heater and move.
OPERATING INSTRUCTIONS
NOTE: NEVER LEAVE AN OPERATING HEATER UNATTENDED
• Plug the heater into a suitable main outlet ensuring the operating voltage of
the device matches the voltage supply in the home.
• With 65° oscillation, the Honeywell ComfortTemp™ Ceramic Heater is
versatile and designed to be placed in the center of the room or closer to
the wall (at least 1 meter away) for maximum convection room heating.
• Turn heater on by pressing the mechanical switch button which is at the
back of the heater (Fig. 1). Then press the Power button visible on the panel
( ). The Power Indicator will illuminate and the heater will start in the
highest level setting.
• When turning on the heater, this one is automatically set to shut off after
8 hours. This is a safety feature. If you should NOT want the heater to
automatically shut off after 8 hours, simply press the Timer button (
ENGLISH GB
until the Continuous heat icon ( ) illuminate on the top of the control
panel.
• To set a temperature, press the arrows ( ). The heater will heat to
achieve the desirable temperature set.
• To select a heat setting, press ( ). There are 3 comfort settings available
to choose from – each setting designed to provide both a unique heat and
sound level based on your desired needs.
• Press the Timer Button ( ) to select 1, 2, 4, or 8 hour setting. The heater
will run for that chosen period in the selected setting/mode, counting down
the hours and automatically shutting the heater off after the selected time
has passed.
• The ComfortTemp™ Ceramic Heater has an oscillation feature. Press the
Oscillate Button ( ) to turn on or off the oscillation function.
• To put the heater in standby mode press the Power button (
control panel. The heater will begin powering down. The heater will shut off
after counting down 10 seconds to cool down internal components. Push
the power switch on the back of the heater to the off position.
• It is important to allow the heater to run through the cool down phase.
DO NOT unplug the heater until it has completed the cool down phase.
SAFEGUARD™ MOTION SENSOR
The Honeywell ComfortTemp™ Ceramic Heater is equipped with a SafeGuard™
Motion Sensor feature. This motion sensor feature identifies objects that may
obstruct the normal flow of heat from the unit, shutting the unit off when
necessary, for an additional level of protection.
How It Works: If an object remains too close to the front of the heater for too
long – 15 centimeters or closer for more than a few seconds – the Motion
Sensor light on the front of the unit will blink as a warning that there is an
obstruction. If the object is not removed, the sensors will disable the heat,
turning the heater off until the object is removed. The heater will restart after
a few seconds once the object is removed.
• Press the SafeGuard™ Motion Sensor Button ( ) to turn this feature on
or off.
REMOTE CONTROL
The Honeywell ComfortTemp™ Ceramic Heater can be controlled using the
remote. This remote uses a button cell type battery which comes included in
the remote.
• To activate the battery, simply pull the plastic tab.
• All functions may be controlled with the remote with the exception of
mechanical switching on and off the heater. This must be done manually
using the switch on the back of the unit.
• Place remote control in the holder located in the handle area in the back of
the heater when not in use.
SAFETY FEATURES
The Honeywell ComfortTemp™ Ceramic Heater is equipped with several
devices and features for added protection:
• A 360° tip-over switch that disables the heater if it is tipped in any direction.
• A high temperature safety sensor prevents overheating.
• This heater is also equipped with a thermal cut-off fuse that will
permanently shut down the heater should it operate at a higher than normal
temperature.
• This heater was built using a high temperature plastic and has a cool to
touch housing and handle.
• This heater is designed with thermal insulated wiring for heat resistance
and reinforced wire connections to help protect against loose connections.
• This heater has a SafeGuard™ Motion Sensor that shuts the heater off if an
object gets too close to the motion sensor.
)
5
) on the