Operation - GRAUPNER mc-19 tiFS Bedienungsanleitung

All material including, but not limited to photographs, text, and concepts contained in this manual is
copyright ©2006-2010. Distribution of this data without permission is strictly prohibited!
All rights reserved, worldwide.
Introduction
Thank you for purchasing the Graupner|tiFS-System. Please read also the entire printed Graupner|iFS ma-
nual for your remote control system in order to know the basic functions of the transmitter.
These operating instructions are part of this product. They contains important notes to the operation and
handling. Please take this into consideration when you pass on the product to third parties. Neglect of the
operating instructions and the safety instructions lead to expiring the warranty.
Graupner constantly work on the advancement of all remote control systems; changes of the scope of deli-
very in form, technology and equipment we must reserve ourselves therefore.
Please have understanding for the fact that from data and illustrations of this operating instructions no
requirements can be derived.
Please keep these instructions for further reference!
Liability
By using this product, you agree to hold Graupner GmbH & Co. KG Power Systems free from any type of
liability either directly or indirectly while using this product.
Legal Information
The 'look and feel' and functionality of this product are protected by German and U.S. copyright laws. Various
terminology and feature names are protected under German and/or U.S. trademark laws.

1. OPERATION

The new Graupner|tiFS system now also provides telemetry functions for the renowned iFS system. A new
feature of Graupner|tiFS is a special 2.4 GHz set-up menu in which functions relevant to 2.4 GHz can be
selected and controlled. These functions include binding, range checking and output power.
The receiver voltage is sent back to the transmitter and displayed on the Multi-Data graphic LCD monitor. It
is also possible to set a warning threshold for receiver battery voltage. If the voltage falls below the threshold
value, the transmitter emits an audible warning. The fail-safe settings for all servo channels are selected
using a clearly arranged dedicated screen page.
2. Receiver voltage downlink
Once the Graupner|tiFS module has been installed, the transmitter menu includes two new displays:
2.4 GHz settings
Fail Safe settings
05
The actual receiver voltage is displayed
on the transmitter screen below the
model name. The warning threshold at
which the audible alarm is triggered can
be set in the menu "2.4 GHz settings".
Bedienungsanleitung Graupner|tiFS