HBM SD01A Bedienungsanleitung Seite 5

SD01A
Symbol:
Meaning: Possibly dangerous situation
Warns of a possibly dangerous situation in which failure to comply with safety
requirements could cause damage to property or result in some kind of minor
physical injury.
Symbol:
Means that important information about the product or its handling is being
given.
Symbol:
Meaning: CE mark
The CE mark enables the manufacturer to guarantee that the product com-
plies with the requirements of the relevant EC directives (the declaration of
conformity is available at http://www.hbm.com/hbmdoc).
Working safely
Error messages must only be acknowledged when the cause of the error has
been removed and no further danger exists.
Conversions and modifications
The Zener barrier must not be modified from the design or safety engineering
point of view. Any modification shall exclude all liability on our part for any
resulting damage. In particular, any repair is prohibited. When exchanging
complete modules, use only original parts from HBM.
Qualified personnel
This instrument may only be installed and used by qualified personnel, strictly
in accordance with the technical data and the safety requirements and
regulations listed below. It is also essential to comply with the legal and safety
requirements for the application concerned during use. The same applies to
the use of accessories.
Qualified personnel means persons entrusted with the installation, assembly,
commissioning and operation of the product who possess the appropriate
qualifications for their function.
A1045−2.4 en/de/fr
CAUTION
NOTE
5
HBM