Maintenance; Maintenance Schedule; To Clean The Product - Husqvarna S 138i Bedienungsanweisung

CAUTION: Pull the plug straight out. Do
not pull the power cord.
Introduction
WARNING: Before you do maintenance, you
must read and understand the safety
chapter.
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of
professional repairs and servicing. If your dealer is not a
service agent, speak to them for information about the
nearest service agent.
S 138i and S 138C
Do a general inspection.
Clean the product.
Examine the dethatcher equipment.
Make sure that the safety devices on the product are not defective. *
Examine the covers. *
Do a check of the motor brake handle. *
Do a check of the start inhibitor. *
S 138i only
Make sure that the ON/OFF button operates correctly and is not defective.
Examine the battery for damage.
Do a check of the battery charge.
Make sure that the release buttons on the battery operates correctly and that the
battery locks into the product.
Examine the battery charger for damage and make sure that it operates correct-
ly.
Examine the connections between the battery and the product. Also examine the
connection between the battery and the battery charger.
To do a general inspection
• Make sure that the nuts and screws on the product
are tightened.
• Make sure that the cables on the product are not in a
position where they can get damaged.
937 - 003 -

Maintenance

Maintenance schedule

The maintenance intervals are calculated from daily use
of the product. The intervals change if the product is not
used daily.
For maintenance identified with *, refer to
on the product on page 9 .

To clean the product

• Clean plastic parts with a clean and dry cloth.
• Do not use water to clean the product. Water can
enter the battery or the motor and cause short circuit
or damage to the product.
Safety devices
Each use Monthly
X
X
X
X
X
X
X
Each use Monthly
X
X
X
X
X
Each
season
Each
season
X
19