Herunterladen Diese Seite drucken

Work Safety - Husqvarna S 138i Bedienungsanweisung

Vorschau ausblenden Andere Handbücher für S 138i:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 82
product in bad weather or in
moist or wet locations is tiring.
Bad weather can cause
dangerous conditions, such as
slippery surfaces.
• Look out for persons, objects
and situations that can prevent
safe operation of the product.
• Look out for obstacles, such
as roots, stones, twigs, pits
and ditches. Long grass can
hide obstacles.
• To operate the product on
slopes can be dangerous. Do
not use the product on ground
that slopes more than 15°.
• Operate the product across
the face of slopes. Do not
move up and down.
• Be careful when you go near
hidden corners and objects
that prevent a clear view.

Work safety

WARNING: Read the
warning instructions that
follow before you use the
product.
• Use this product to remove
thatch and moss from grass
lawns only. It is not permitted
to use it for other tasks.
• Use personal protective
equipment. Refer to
8
• Do not operate the product in
• Do not operate the product
• Make sure that the dethatcher
• If the dethatcher equipment
Personal
protective equipment on page
9 .
rain or wet conditions. The risk
of electrical shock increases if
water enters the product.
unless the dethatcher
equipment and all covers are
attached correctly. An
incorrectly attached dethatcher
equipment can come loose
and cause personal injury.
equipment does not hit objects
such as stones and roots. This
can do damage to the
dethatcher equipment and
bend the motor shaft. A bent
axle causes heavy vibration
and a very high risk that the
dethatcher equipment
becomes loose.
hits an object or if vibrations
occur, stop the product
immediately. Stop the motor,
turn the safety key to 0 and
remove the battery (model S
138i) or disconnect the power
cord (model S 138C). Examine
the product for damages.
Repair damages or let an
authorised service agent do
the repair.
937 - 003 -

Quicklinks ausblenden:

Werbung

loading

Diese Anleitung auch für:

S 138c