18029_deutsch-englisch
Remedy for handling faults
Problem
Release cannot be pressed
Exposure meter does not indicate
Green LED does not light up when battery test button
is pressed
Exposure balance is not possible
Picture is poorly exposed
When using flash with system adapter
34
Rolleiflex 2.8 FX / 4.0 FW
14.03.2003
13:56 Uhr
Seite 34
Cause
Release is locked
Shutter is not locked
Crank is in an intermediate
position, not in the cocked end position
30 sec. "switched on" period has elapsed
Battery discharged
Battery polarity wrong
Unsuitable choice of film: high speed film in bright
light slow film in weak light
Fault measurement due to strong stray light via the
viewfinder hood
Important parts of the picture lay outside the
measuring field
Wrong set of film speed
Flash unit not ready
Flash energy to low respectively aperture too small
Wrong set of film speed