Releasing And Exposing; Film Transport And Shutter Tensioning - Rollei Rolleiflex 2,8 FX Gebrauchsanweisung

18029_deutsch-englisch

Releasing and exposing

Unlock release: Throw safety lever 31 at release 30 from
"locked" to "unlocked" (green dot). To ensure shakeless
exposure, the release is provided with a cable release
socket.
Long time exposures ("B", over 1 sec): Press
release and hold for time of exposure. The shutter will
not close till you let go.
For extreme long time exposures press release and
"lock" with safety lever. Terminate exposure by
"unlocking". (Caution: Do not shake the camera!
Without touching the camera, shield the lens with your
hand when opening and closing the shutter.)
14.03.2003 13:56 Uhr
31
30
Seite 29

Film transport and shutter tensioning

After shooting: Unfold the crank 32, turn it clockwise
until lock and back again to its starting position.
The shutter is now cocked again and the camera is
ready for operation. Only after release the crank can be
operated again. Double exposures and blank frames are
excluded.
(Exception: Double exposures, see page 12.)
Rolleiflex 2.8 FX / 4.0 FW
32
29