DE
6.4 Treppensteigsystem ankippen
WARNUNG - Zum Treppensteigen
und
Befahren
Ebenen
angekippt werden.
s-max über den EIN/AUS-
Schalter einschalten.
AUF/AB-Schalter in Rich-
tung „AB" betätigen.
» Steigbein muss die Lauf-
räder ca. 1-2 cm vom
Boden abheben.
Fuß am Antriebsgehäuse
abstützen und s-max leicht
nach hinten kippen. Gerät
muss ausbalanciert wer-
den.
» Das Gerät ist dann aus-
balanciert,
wenn
Handgriff weder Druck
noch Zug zu spüren
sind.
von
schiefen
muss
der
s-max
41
im
6.4 Tilt the stair climbing system
WARNING - To drive on slopes
or to climb stairs you have to tilt
the s-max.
Turn on the s-max by
pressing
switch.
Press
the
switch, direction DOWN.
» The climber has to lift the
main wheels at least 1-2
cm off the floor.
Put your foot on the power
unit's housing and tilt the
s-max
slightly
you until you feel that the
device is balanced.
» The s-max is balanced if
you feel neither pull nor
push in the handle.
GB
the
ON/OFF
UP/DOWN
towards