Dometic TEC 60EV Bedienungsanleitung Seite 13

TEC60EV
Control elements in the connection box
The connection box is located on the generator behind the cover.
No. in
fig. 2,
Description
page 3
1 Main switch
2 Thermal protection of the
inverter
Control elements in the control panel
The control panel is installed in the vehicle interior.
No. in
fig. 3,
Description
page 4
1 Display
On/Off switch P
2
3 Grey button START/STOP
4 Petrol gauge
5 Oil gauge
EN
Switches the generator to standby or no
function.
Activates if the inverter overheats (see chapter
"Display messages" on page 16)
Shows the status reports.
Switches the control panel on and off if the
main switch is at "I" or "1".
Stops the generator in emergency.
Starts/stops the generator if the control panel
is switched on and the main switch is at "I" or
"1".
Lights up if the petrol goes into reserve.
Lights up if the oil level is too low in the
engine.
Technical description
13