Electrolux ST401SCN10 Benutzerinformation Seite 57

2. Remove the upper door.
3. Remove the upper support and install it
in the opposite side.
4. Unscrew the middle hinge (H). Remove
the plastic plugs located on the oppo-
site side of the central hinge and install
them in the holes occupied before by
the hinge.
5. Remove the lower door.
6. Remove the ventilation grille which is
fixed by two screws.
7. Carefully put the appliance to its back,
totally unscrew the adjustable foot and
screw it in the opposite side.
8. Remove the bottom hinge by unscrew-
ing its fixing screws.
9. Using a 12 mm spanner, unscrew the
hinge pin and reassemble it on the op-
posite side of the hinge.
H
10. Install the lower hinge in the opposite
side, using the screws previously re-
moved.
11. Carefully put the appliance in its work-
ing position and adjust the level of the
appliance by screwing / unscrewing the
adjustable feet at the bottom of the
cabinet using your fingers or a tool.
12. Slide the hole cover out of the ventila-
tion grille by pushing it in the direction
of the arrow and reassemble it on the
opposite side.
13. Install the ventilation grille, fixing the
screws.
14. Remove the plugs (A) on the upper side
of both doors and move them to the
other side.
electrolux 57
A