Installation Of The Taste Guard Filter; Replacing The Taste Guard Filter - Electrolux ST 401 CNN Benutzerinformation

Installation of the Taste
Guard Filter
Taste guard filter is an active carbon
filter which absorbs bad odors and
permits to maintain the best flavour
and aroma for all foodstuffs without
risk of odour cross contamination.
On delivery the active carbon filter is
placed in a plastic bag to secure its
length of life.
Before the appliance is turned on,
remove the filter from its plastic bag
and place it inside the flap.
• Pull the flap outward
• nsert the active carbon filter in the
slot found in the back of the flap
• Close the flap.
During the operation,always
keep the air ventilation flap
closed.The filter should be handled
carefully to prevent its surface from
being scratched.
Replacing the Taste
Guard filter
To get the best performance the active
carbon filter should be changed once
every year.
New active carbon filters can be
purchased from your local dealer.
• The filter is placed behind the flap
and can be reached by pulling the
flap outward.
• Pull out of the slot the exhausted
charcoal filter.
• Insert the new charcoal filter in the
slot
• Close the flap.
During the operation,always
keep the air ventilation flap
closed.The filter should be handled
carefully to prevent its surface from
being scratched.
electrolux 75