Replacing The Lamp; Removing The Drawer - Electrolux EKI6451AOX Benutzerinformation

30 www.electrolux.com
1
1. Open the door fully.
2. Move the slider until you hear a click.
3. Close the door until the slider locks.
4. Remove the door.
To remove the door, pull the door
outwards first from one side, and then
the other.
When the cleaning procedure is
completed, insert the oven door in the
opposite sequence. Make sure that you
hear a click when you insert the door. Use
force if necessary.
11.5 Removing and cleaning the
door glasses
1. Hold the door trim (B) on the top edge
of the door at the two sides and push
inwards to release the clip seal.
2
B
2. Pull the door trim to the front to
remove it.
3. Hold the door glass panels on their
top edge one by one and pull them
upwards from the guide.
2
The door glass in your
product can be different in
type and shape from the
examples you see in the
images. The number of
glasses can also be different.
1
4. Clean the door glass panels.
To install panels, do the same steps in
reverse.

11.6 Replacing the lamp

Put a cloth on the bottom of the interior of
the appliance. It prevents damage to the
lamp glass cover and the cavity.
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box
or deactivate the circuit breaker.
The back lamp
The lamp glass cover is at the
back of the cavity.
1. Turn the lamp glass cover
counterclockwise to remove it.
2. Clean the glass cover.
3. Replace the oven lamp with a suitable
300 °C heat-resistant oven lamp.
Use the same oven lamp type.
4. Install the glass cover.

11.7 Removing the drawer

WARNING!
When the oven is in use, heat
can build up in the drawer.
Do not keep flammable
things in there (e.g. cleaning
materials, plastic bags, oven
gloves, paper, cleaning
sprays, etc.).