Cleaning The Oven Door - Electrolux EKI6450AO Benutzerinformation

11.1 Shelf supports
You can remove the shelf supports to
clean the side walls.
Removing the shelf supports
1
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
Valid with telescopic runners:
The retaining pins on the tele-
scopic shelf runners must point to
the front!
CAUTION!
Make sure that the longer fixing
wire is in the front. The ends of
the two wires must point to the
rear. Incorrect installation can
cause damage to the enamel.

11.2 Cleaning the oven door

To make the cleaning easier, remove the
door.
2
1. Pull the front of the shelf support
away from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove
it.
WARNING!
Make sure that the glass panels
are cool before you clean the
glass door. There is a risk that the
glass could break.
WARNING!
When the door glass panels are
damaged or have scratches, the
glass becomes weak and can
break. To prevent this, you must
replace them. For more instruc-
tions, contact your local Service
Centre.
ENGLISH 29