Philips SRU 3003 Bedienungsanleitung Seite 44

English
44
Problem
Hair starts to
grow again
on some
spots of the
treated areas.
Possible
cause
You do not
use the
appliance as
often as
Commanded.
The
appliance is
not suitable
for your hair
or skin colour.
You did not
make enough
overlaps
when you
used the
appliance.
Solution
To remove all hairs successfully
and prevent the hair follicle from
becoming active again, the treatments
have to be repeated once every
two weeks for the first two to three
months. Your skin should be smooth
by then.To ensure that your skin stays
smooth, we advise you to repeat the
treatment every four to six weeks.
The time between treatments may
vary based on your individual hair
regrowth and also across different
body areas. If too many hairs grow
back between treatments, simply
shorten the treatment interval again,
but do not treat any area more often
than once every two weeks. When
you use the appliance more frequently
than recommended, you do not
increase the effectiveness but you do
increase the risk of skin reactions.
Do not use the appliance if your body
hair is light blond, red, grey or white.
Do not use the appliance either if you
have very dark skin.
For proper hair-removal results, you
have to make overlaps when you use
the appliance. See chapter
'Using the appliance', step 7.