Tanning With Creams; Using The Appliance - Philips SRU 3003 Bedienungsanleitung

English
22
Tanning with artificial light
- Follow the instructions in 'Sun exposure before
treatment' and 'Sun exposure after treatment' above.

Tanning with creams

- If you have used artificial tanning lotion, wait until
the artificial tan has fully disappeared before you
use Philips Lumea Plus for men.

Using the appliance

Check the recommended light intensities table in
chapter 'Preparing for use', section 'Setting the light
intensity' to determine which light intensities are most
suitable for your skin and body hair colour. Use the
appliance in a well-lit room; this reduces the perceived
brightness of the flash. Shave the area you intend
to treat before you use the appliance (see chapter
'Preparing for use', section 'Preparing treatment areas').
If the treatment becomes intolerably painful at any
point in time, reduce the light intensity setting until
the treatment is comfortable again. If you notice
skin reactions stronger than slight redness, stop the
treatment immediately and read section 'Possible
side effects and skin reactions' in this chapter.
First use and skin test
When you use the appliance for the first time, we
advise you to perform a skin test on the area to be
treated to check your skin's reaction to the treatment
and to get accustomed to light-based treatment.
1 Choose an area close to the intended
treatment area.