Philips SRU 3003 Bedienungsanleitung Seite 32

English
32
2 To remove the body attachment, put your
fingers in the recesses at the top and bottom
and pull gently. The attachment should come off
easily.
3 Moisten the soft cloth supplied with the
appliance with a few drops of water and use it
to clean the following parts:
- the light exit window
- the outside surface of the body attachment
- the metallic frame inside the body attachment
Note: If water does not clean effectively, use a few
drops of high-percentage alcohol to clean the parts
mentioned above.
Note: A contaminated light exit window can look like
this picture. Make sure you clean the appliance before
and after each use and, if necessary, also during the
treatment according to the instructions in this section.
4 If necessary, clean the outside of the appliance with
the dry soft cloth supplied with the appliance.
Tip: If it is no longer possible to clean the edges of the
attachment with the cleaning cloth supplied, use a cotton
bud instead. Make sure that no fluff of fibres stay behind
on the attachment or on the light exit window.
Storage
1 Switch off the appliance, unplug it and let it
cool down.
2 Clean the appliance before you store it.
3 Put the appliance in the pouch supplied.
4 Store the appliance in a dry place at a
temperature between 0°C and 60°C.