Philips SRU 3003 Bedienungsanleitung Seite 40

English
40
Problem
The
appliance
does not
show light
intensity 1
when I switch
it on.
The
appliance
produces a
strange smell.
Possible
cause
The
appliance
needs to be
reset.
The body
attachment is
dirty.
You have
not shaved
the area to
be treated
properly.
Solution
To reset the appliance, switch it off
and on again. If the appliance still does
not show light intensity 1, contact your
Customer Care Centre, your Philips
dealer or a Philips Service Centre.
Clean the body attachment carefully.
If you are unable to clean the body
attachment properly, contact the
Consumer Care Centre in your
country, your Philips dealer or a Philips
service centre to replace the body
attachment.
If there are hairs on the area to be
treated, these hairs may get burnt
when you use the appliance. As a
result, you notice a strange smell.
Shave the area to be treated properly
before you use the appliance. If
shaving causes skin irritation, trim
hairs as short as possible and use a
comfortable setting.