Philips SRU 3003 Bedienungsanleitung Seite 42

English
42
Problem
The treated
areas
become red
after the
treatment.
Possible
cause
You treated
an area for
which the
appliance is
not intended.
You have
used a light
intensity
which is too
high for you.
The UV
filter of the
light exit
window is
broken.
The
appliance is
not suitable
for your skin
colour.
Slight
redness is
harmless and
normal and
disappears
quickly.
Solution
Only use the appliance on the
underarms, pubic area (excluding the
scrotum), shoulders, chest, back and
legs.
Reduce the light intensity to a level
that is comfortable for you. See
chapter 'Preparing for use', section
'Setting the light intensity'.
If the UV filter of the light exit
window is broken, do not use the
appliance any more. Contact the
Consumer Care Centre in your
country, your Philips dealer or a Philips
service centre.
Do not use the appliance if you have
a very dark skin. Do not use it either if
your body hair is light blond, red, grey
or white.
No action required.