Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
How to remove the display from the
wall-hanging bracket
Note
• The screws for securing the unit may fall by accident and
cause damage to the À oor. Lay a blanket or soft cloth
below the display.
Pull out the display towards you, and remove the
screws for securing the unit
side) on the sides (on either side) of the
wall-hanging bracket.
Move the display back into the vertical position.
Push the center of the bottom part of the display
and mount the display vertically on the wall.
• Gently pull the display towards you to con¿ rm that it
has been locked.
While lifting the bottom part of the display, pull the
display toward you.
Once the insulation spacers at the bottom have
been released, lift the display straight up.
Ensure that the display unit, which has now been
removed from the wall-hanging bracket, is kept
upright while it is being handled so that no load will
be applied to its front or back panel.
(one screw on each
Insulation
spacer at
bottom
④
Blanket
or piece
of cloth
Screw for securing
the unit
Floor surface
⑤
25
Werbung
Inhaltsverzeichnis
