Safety And Compliance Information; Safety Precautions; Country-Specific Cautions And Warnings For Wideband Data Transmission Systems: 2400-2483.5 Mhz - Rimage Professional 3400 Bedienungsanleitung

Important Information

Safety and Compliance Information

This manual and the indications on the product allow proper and safe
operation. The indication marks below help protect you and other persons
from injury, and equipment from damage.

Safety Precautions

To ensure safety, read these precautions and familiarize yourself with their
meaning before using the equipment.
Warnings!
n
• The laser beam used by the CD/DVD Recorder is a Class 1 laser. Do not attempt to
open the recorder. An authorized technician should perform all service procedures.
• Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiant exposure.
• Never use any optical instrument in conjunction with this unit. To do so will greatly
increase the hazard to your eyes.
• Do not disassemble or use tools on the printer. All service procedures should be
performed by a Rimage-authorized technician, or sent in for Rimage-authorized
repair.
• The interior of the printer contains sharp edges.
• Do not touch the heat roller.
• Do not touch the circuit boards. The circuit boards can be damaged by electrostatic.
• Do not remove the back panel unless the autoloader has been powered off.
• Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
• This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
• This equipment complies with FCC radiation exposure limits set forth for a
controlled equipment and meets the FCC radio frequency (RF) Exposure Guidelines
in Supplement C to OET65. This equipment has very low levels of RF energy that it
deemed to comply without maximum permissive exposure evaluation (MPE). But
it is desirable that it should be installed and operated keeping the radiator at least
20cm or more away from person's body (excluding extremities: hands, wrists, feet
and ankles).
Cautions:
n
• For continued protection against risk of fire, replace the fuse only with the same
type and rating. An authorized technician should perform all service procedures.
• Use only the supplied AC power cord, or use a safety agency approved power cord.
For applications outside North America, refer to the nearest Rimage office for
assistance in selecting a locally approved power cord.
• This product is designed for an office environment.
2001431_C
All manuals and user guides at all-guides.com
For more information visit
• The Professional 3400 and 5400N contain a lithium battery. There is a risk of
explosion if the battery is replaced by an incorrect battery. Dispose of the old battery
according to the manufacturer's instructions included with the battery packaging.
• All equipment with AC line voltage, or low DC voltages, such as switches, power
supplies, fuses, fans, and non-stepper motors, must be replaced with Rimage-
approved components to maintain the safety approval issued by UL.
• Allow sufficient free space for opening the printer tray. Do not touch the printer tray
while it is in motion.
• If the side cover is opened while power is supplied, the printer will stop. Do not
reach into the printer while it is in operation. Do not attempt to bypass the door
interlock.
Country-specific Cautions and Warnings for Wideband
Data Transmission Systems: 2400-2483.5 MHz
Warnings!
n
• Canada: This equipment complies with IC radiation exposure limits set forth for a
controlled equipment and meets RSS-102 of the IC radio frequency (RF) Exposure
rules. This equipment has very low levels of RF energy that it deemed to comply
without maximum permissive exposure evaluation (MPE). But it is desirable that it
should be installed and operated keeping the radiator at least 20cm or more away
from person's body (excluding extremities: hands, wrists, feet and ankles).
• Taiwan: Certified by the type of low-power radio, company, firm or user are
not allowed to change the frequency, increase power or change the original
design features and functions without proper authorization. Use of low-power
radio electrical devices shall not affect flight safety or interfere with legitimate
communications; equipment should be immediately disabled if interference is
found, and it may not be used again until it is improved to be non-interference.
Legitimate communication refers to operation in accordance with the provisions
of the Telecommunications Act of Radio Communication. Low-power radio
communications must be able to stand radio interference of electrical equipment of
legitimate communications and industrial, scientific and medical radio radiation.
第十二條 經型式認證合格之低功率射頻電機，非經许可，公司、
商號或使用者均不得擅自變更频率、加大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發
現有干擾現象時，應立即停用，并改善至無干擾时方得繼續使用。
前項合法通信，指依電信信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波辐射性電機設備
之干擾。
Cautions:
n
• France: Do not use outdoors.
• Italy: If used outside of own premises, general authorization is required.
• Norway: This subsection does not apply for the geographical area within a radius of
20km from the center of NY-Alesund.
rimage.com/support
4