Maintain The 3400 And 5400N; Overview; Cautionary Information; Preventative Maintenance Schedule - Rimage Professional 3400 Bedienungsanleitung

Maintain the 3400 and 5400N

This section provides maintenance information for the 3400 and 5400N
systems, including the integrated Everest 400 printer.
Important! For optimum performance, keep the 3400 and 5400N in a clean,
dust-free environment.

Overview

Regular preventative maintenance of your system can help to ensure error-
free recordings and clean printed labels. Maintenance also involves cleaning
the system.
For information on autoloader and printer maintenance, refer to the Rimage
Professional 3400 and 5400N User Guide that was included with your
autoloader.

Cautionary Information

Caution: To avoid damaging the 3400 or 5400N during maintenance:
n
• Never use oils, silicone, or other lubricants on any part of the system.
• Use only non-abrasive cleaners to wipe down the surfaces of your
system.
• Use only a damp cotton cloth to wipe off the touch screen.
• Never use cleaners to clean the embedded PC.
• Avoid pouring cleaners directly onto the autoloader. Instead, apply
the cleaner a clean, lint-free cloth.

Preventative Maintenance Schedule

Task Tools
Autoloader Maintenance
Wipe down the lift arm shaft Lint-free cloth
and pay close attention to:
• The area around the base of
the shaft
• The area just above the lift
arm
2001431_C
All manuals and user guides at all-guides.com
Frequency
Weekly
For more information visit
Task
Autoloader Maintenance
Wipe down all surfaces of the
autoloader, including:
• Sides and • Carousel
top
• Top surface
• Door on the lift
arm
• Output bin
Remove dust and debris from
the fan at the back of the
autoloader.
Remove dust and debris from
the openings at the back of
the autoloader.
Remove dust and debris from
the front and inside of the
autoloader.
Integrated Everest 400 Printer Maintenance
Clean the print head. Refer
to the Clean the Print Head
section on page 23.
Clean the tacky rollers. Refer
Clean the Tacky Rollers
to the
section on page 24.
Clean the sensors. Refer to the
Clean the Sensors section on
page 25.
rimage.com/support
Tools Frequency
• Lint-free cloth Weekly
• Non-abrasive, all-
purpose cleaner
Can of compressed air Monthly
Vacuum Monthly
Can of compressed air Monthly
• Sponge swabs with long After 2000 discs
handles (included in the (as needed) or
Everest cleaning kit) at every ribbon
change
• 99% Isopropyl alcohol
• Sponge swabs with long After 2000 discs
handles (included in the or at every ribbon
Everest cleaning kit) change
• 99% Isopropyl alcohol
• Sponge swabs with long Refer to the
Clean the Sensors
handles (included in the
Everest cleaning kit) section on page
25
• 99% Isopropyl alcohol
22